We build high-pressure mercury UV lamps that pull double duty—packing a serious ultraviolet punch and focused infrared heat into one tough package. They’re made for the gritty, demanding work of industrial curing, drying, and material processing, where you need both raw energy and precise control over the spectrum. Let’s talk about the guts of it. These lamps run on serious juice—we’re talking 400V—to fire up and hold that arc inside the quartz tube. That voltage is exactly what it takes to get the mercury vapor glowing under high pressure, which is how you get that intense UV and heat. They’re typically rated around 2500W, a power level matched to a tube length of about 300mm. That tight power density is what gives you the intensity you need. Just know this: it also means the fixture and the surrounding equipment need solid cooling to handle the heat. Now, the build. The quartz envelope is filled with halogen, which helps keep the arc stable and fights off that blackening that kills lamp life. Out on the surface, a specialized coating filters specific wavelengths, so you’re only getting the radiation you want and the heat stays consistent. And the connector? It’s an R7s double-ended design. It’s rigid, handles high current, and locks everything in place with pinpoint alignment. The payoff is a compact footprint and a straightforward, drop-in replacement when it’s time to swap one out. Where this really shines is on the factory floor. Take PET blowing or UV curing. This setup gives you a high-intensity point source that gets the job done fast. The combo of high pressure, high wattage, and a controlled spectrum means rapid heating and curing, all in a small footprint. The R7s mounting keeps mechanical integration simple, so you’re not stuck with long downtimes when a lamp needs replacing. But here’s the trade-off you should know: there’s a lot of heat coming off the fixture. That means your machine design has to be built with serious thermal management in mind.
